/*
 * FreeRTOS V202212.00
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

#ifndef DEMO_CONFIG_H
#define DEMO_CONFIG_H

/* FreeRTOS config include. */
#include "FreeRTOSConfig.h"

/**************************************************/
/******* DO NOT CHANGE the following order ********/
/**************************************************/

/* Include logging header files and define logging macros in the following order:
 * 1. Include the header file "logging_levels.h".
 * 2. Define the LIBRARY_LOG_NAME and LIBRARY_LOG_LEVEL macros depending on
 * the logging configuration for DEMO.
 * 3. Include the header file "logging_stack.h", if logging is enabled for DEMO.
 */

#include "logging_levels.h"

/* Logging configuration for the Demo. */
#ifndef LIBRARY_LOG_NAME
    #define LIBRARY_LOG_NAME    "JobsDemo"
#endif

#ifndef LIBRARY_LOG_LEVEL
    #define LIBRARY_LOG_LEVEL    LOG_INFO
#endif

/* Prototype for the function used to print to console on Windows simulator
 * of FreeRTOS.
 * The function prints to the console before the network is connected;
 * then a UDP port after the network has connected. */
extern void vLoggingPrintf( const char * pcFormatString,
                            ... );

/* Map the SdkLog macro to the logging function to enable logging
 * on Windows simulator. */
#ifndef SdkLog
    #define SdkLog( message )    vLoggingPrintf message
#endif

#include "logging_stack.h"

/************ End of logging configuration ****************/

/**
 * @brief The Thing resource registered on your AWS IoT account to use in the demo.
 * A Thing resource is required to communicate with the AWS IoT Jobs service.
 *
 * @note The Things associated with your AWS account can be found in the
 * AWS IoT console under Manage/Things, or using the ListThings REST API (that can
 * be called with the AWS CLI command line tool).
 *
 * #define democonfigTHING_NAME    "...insert here..."
 */

/**
 * @brief The MQTT client identifier used in this example.  Each client identifier
 * must be unique so edit as required to ensure no two clients connecting to the
 * same broker use the same client identifier.
 *
 * #define democonfigCLIENT_IDENTIFIER "...insert here..."
 */

/**
 * @brief The AWS IoT broker endpoint to connect to in the demo.
 *
 * @note Your AWS IoT Core endpoint can be found in the AWS IoT console under
 * Settings/Custom Endpoint, or using the describe-endpoint REST API (with
 * AWS CLI command line tool).
 *
 * #define democonfigMQTT_BROKER_ENDPOINT    "...insert here..."
 */

/**
 * @brief The port to use for the demo.
 *
 * In general, port 8883 is for secured MQTT connections.
 *
 * @note Port 443 requires use of the ALPN TLS extension with the ALPN protocol
 * name. Using ALPN with this demo would require additional changes, including
 * setting the `pAlpnProtos` member of the `NetworkCredentials_t` struct before
 * forming the TLS connection. When using port 8883, ALPN is not required.
 *
 * #define democonfigMQTT_BROKER_PORT    ( insert here. )
 */

/**
 * @brief Root CA certificate of AWS IoT broker.
 *
 * This certificate is used to identify the AWS IoT server and is publicly
 * available. Refer to the link below.
 * https://www.amazontrust.com/repository/AmazonRootCA1.pem
 *
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----\n"
 *
 * #define democonfigROOT_CA_PEM    "...insert here..."
 */

/**
 * @brief Client certificate.
 *
 * Please refer to the AWS documentation below for details
 * regarding client authentication.
 * https://docs.aws.amazon.com/iot/latest/developerguide/client-authentication.html
 *
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----\n"
 *
 * #define democonfigCLIENT_CERTIFICATE_PEM    "...insert here..."
 */

/**
 * @brief Client's private key.
 *
 * Please refer to the AWS documentation below for details
 * regarding client authentication.
 * https://docs.aws.amazon.com/iot/latest/developerguide/client-authentication.html
 *
 * @note This private key should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN RSA PRIVATE KEY-----\n"\
 * "...base64 data...\n"\
 * "-----END RSA PRIVATE KEY-----\n"
 *
 * #define democonfigCLIENT_PRIVATE_KEY_PEM    "...insert here..."
 */

/**
 * @brief The username value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * Please refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_USERNAME    "...insert here..."
 */

/**
 * @brief The password value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * Please refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_PASSWORD    "...insert here..."
 */

/**
 * @brief The name of the operating system that the application is running on.
 * The current value is given as an example. Please update for your specific
 * operating system.
 */
#define democonfigOS_NAME                   "FreeRTOS"

/**
 * @brief The version of the operating system that the application is running
 * on. The current value is given as an example. Please update for your specific
 * operating system version.
 */
#define democonfigOS_VERSION                tskKERNEL_VERSION_NUMBER

/**
 * @brief The name of the hardware platform the application is running on. The
 * current value is given as an example. Please update for your specific
 * hardware platform.
 */
#define democonfigHARDWARE_PLATFORM_NAME    "WinSim"

/**
 * @brief The name of the MQTT library used and its version, following an "@"
 * symbol.
 */
#include "core_mqtt.h" /* Include coreMQTT header for MQTT_LIBRARY_VERSION macro. */
#define democonfigMQTT_LIB               "core-mqtt@"MQTT_LIBRARY_VERSION

/**
 * @brief Set the stack size of the main demo task.
 *
 * In the Windows port, this stack only holds a structure. The actual
 * stack is created by an operating system thread.
 */
#define democonfigDEMO_STACKSIZE         configMINIMAL_STACK_SIZE

/**
 * @brief Size of the network buffer for MQTT packets.
 */
#define democonfigNETWORK_BUFFER_SIZE    ( 1024U )

#endif /* DEMO_CONFIG_H */