/* * FreeRTOS V202212.00 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * https://www.FreeRTOS.org * https://github.com/FreeRTOS * */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See https://www.freertos.org/a00110.html *----------------------------------------------------------*/ #define configASSERT_DEFINED 1 extern void vAssertCalled( void ); #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( ) #define configUSE_PREEMPTION 1 #define configUSE_TIME_SLICING 1 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 #define configCPU_CLOCK_HZ ( ( unsigned long ) 20000000 ) #define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 2000 ) #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 279000 ) ) #define configMAX_TASK_NAME_LEN ( 10 ) #define configUSE_TRACE_FACILITY 0 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 0 #define configMAX_PRIORITIES ( 10 ) #define configTIMER_QUEUE_LENGTH 20 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 3 ) #define configUSE_COUNTING_SEMAPHORES 1 #define configSUPPORT_DYNAMIC_ALLOCATION 1 #define configNUM_TX_DESCRIPTORS 15 /* Set the following definitions to 1 to include the API function, or zero * to exclude the API function. */ #define configUSE_MALLOC_FAILED_HOOK 1 #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define INCLUDE_vTaskPrioritySet 0 #define INCLUDE_uxTaskPriorityGet 0 #define INCLUDE_vTaskDelete 0 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 0 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define configKERNEL_INTERRUPT_PRIORITY 255 /* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! * See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ #define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 #define configMAC_INTERRUPT_PRIORITY 5 /* networking definitions */ #define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 2 ) #define ipconfigUSE_NETWORK_EVENT_HOOK 1 /*#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME pdMS_TO_TICKS(5000) */ #define configNETWORK_INTERFACE_TO_USE 1L /* The address of an echo server that will be used by the two demo echo client * tasks. * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html */ #define configECHO_SERVER_ADDR0 10 #define configECHO_SERVER_ADDR1 136 #define configECHO_SERVER_ADDR2 206 #define configECHO_SERVER_ADDR3 133 /* Default MAC address configuration. The demo creates a virtual network * connection that uses this MAC address by accessing the raw Ethernet/WiFi data * to and from a real network connection on the host PC. See the * configNETWORK_INTERFACE_TO_USE definition above for information on how to * configure the real network connection to use. */ #define configMAC_ADDR0 0x52 #define configMAC_ADDR1 0x54 #define configMAC_ADDR2 0x00 #define configMAC_ADDR3 0x12 #define configMAC_ADDR4 0x34 #define configMAC_ADDR5 0xAD /* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configIP_ADDR0 10 #define configIP_ADDR1 211 #define configIP_ADDR2 55 #define configIP_ADDR3 5 /* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to * 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configGATEWAY_ADDR0 10 #define configGATEWAY_ADDR1 211 #define configGATEWAY_ADDR2 55 #define configGATEWAY_ADDR3 1 /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and * 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set * to 1 but a DNS server cannot be contacted.*/ #define configDNS_SERVER_ADDR0 127 #define configDNS_SERVER_ADDR1 0 #define configDNS_SERVER_ADDR2 0 #define configDNS_SERVER_ADDR3 53 /* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configNET_MASK0 255 #define configNET_MASK1 255 #define configNET_MASK2 255 #define configNET_MASK3 0 /* The UDP port to which print messages are sent. */ #define configPRINT_PORT ( 15000 ) #endif /* FREERTOS_CONFIG_H */