/*!
    \ingroup 3DES

    \brief This function sets the key and initialization vector (iv) for the
    Des structure given as argument. It also initializes and allocates space
    for the buffers needed for encryption and decryption, if these have not
    yet been initialized. Note: If no iv is provided (i.e. iv == NULL)
    the initialization vector defaults to an iv of 0.

    \return 0 On successfully setting the key and initialization vector for
    the Des structure

    \param des pointer to the Des structure to initialize
    \param key pointer to the buffer containing the 8 byte key with which to
    initialize the Des structure
    \param iv pointer to the buffer containing the 8 byte iv with which to
    initialize the Des structure. If this is not provided, the iv defaults to 0
    \param dir direction of encryption. Valid options are: DES_ENCRYPTION,
    and DES_DECRYPTION

    _Example_
    \code
    Des enc; // Des structure used for encryption
    int ret;
    byte key[] = { // initialize with 8 byte key };
    byte iv[]  = { // initialize with 8 byte iv };

    ret = wc_Des_SetKey(&des, key, iv, DES_ENCRYPTION);
    if (ret != 0) {
    	// error initializing des structure
    }
    \endcode

    \sa wc_Des_SetIV
    \sa wc_Des3_SetKey
*/
WOLFSSL_API int  wc_Des_SetKey(Des* des, const byte* key,
                               const byte* iv, int dir);

/*!
    \ingroup 3DES

    \brief This function sets the initialization vector (iv) for the Des
    structure given as argument. When passed a NULL iv, it sets the
    initialization vector to 0.

    \return none No returns.

    \param des pointer to the Des structure for which to set the iv
    \param iv pointer to the buffer containing the 8 byte iv with which to
    initialize the Des structure. If this is not provided, the iv defaults to 0

    _Example_
    \code
    Des enc; // Des structure used for encryption
    // initialize enc with wc_Des_SetKey
    byte iv[]  = { // initialize with 8 byte iv };
    wc_Des_SetIV(&enc, iv);
    }
    \endcode

    \sa wc_Des_SetKey
*/
WOLFSSL_API void wc_Des_SetIV(Des* des, const byte* iv);

/*!
    \ingroup 3DES

    \brief This function encrypts the input message, in, and stores the result
    in the output buffer, out. It uses DES encryption with cipher block
    chaining (CBC) mode.

    \return 0 Returned upon successfully encrypting the given input message

    \param des pointer to the Des structure to use for encryption
    \param out pointer to the buffer in which to store the encrypted ciphertext
    \param in pointer to the input buffer containing the message to encrypt
    \param sz length of the message to encrypt

    _Example_
    \code
    Des enc; // Des structure used for encryption
    // initialize enc with wc_Des_SetKey, use mode DES_ENCRYPTION

    byte plain[]  = { // initialize with message };
    byte cipher[sizeof(plain)];

    if ( wc_Des_CbcEncrypt(&enc, cipher, plain, sizeof(plain)) != 0) {
	    // error encrypting message
    }
    \endcode

    \sa wc_Des_SetKey
    \sa wc_Des_CbcDecrypt
*/
WOLFSSL_API int  wc_Des_CbcEncrypt(Des* des, byte* out,
                                   const byte* in, word32 sz);

/*!
    \ingroup 3DES

    \brief This function decrypts the input ciphertext, in, and stores the
    resulting plaintext in the output buffer, out. It uses DES encryption
    with cipher block chaining (CBC) mode.

    \return 0 Returned upon successfully decrypting the given ciphertext

    \param des pointer to the Des structure to use for decryption
    \param out pointer to the buffer in which to store the decrypted plaintext
    \param in pointer to the input buffer containing the encrypted ciphertext
    \param sz length of the ciphertext to decrypt

    _Example_
    \code
    Des dec; // Des structure used for decryption
    // initialize dec with wc_Des_SetKey, use mode DES_DECRYPTION

    byte cipher[]  = { // initialize with ciphertext };
    byte decoded[sizeof(cipher)];

    if ( wc_Des_CbcDecrypt(&dec, decoded, cipher, sizeof(cipher)) != 0) {
    	// error decrypting message
    }
    \endcode

    \sa wc_Des_SetKey
    \sa wc_Des_CbcEncrypt
*/
WOLFSSL_API int  wc_Des_CbcDecrypt(Des* des, byte* out,
                                   const byte* in, word32 sz);

/*!
    \ingroup 3DES

    \brief This function encrypts the input message, in, and stores the result
    in the output buffer, out. It uses Des encryption with Electronic
    Codebook (ECB) mode.

    \return 0: Returned upon successfully encrypting the given plaintext.

    \param des pointer to the Des structure to use for encryption
    \param out pointer to the buffer in which to store the encrypted message
    \param in pointer to the input buffer containing the plaintext to encrypt
    \param sz length of the plaintext to encrypt

    _Example_
    \code
    Des enc; // Des structure used for encryption
    // initialize enc with wc_Des_SetKey, use mode DES_ENCRYPTION

    byte plain[]  = { // initialize with message to encrypt };
    byte cipher[sizeof(plain)];

    if ( wc_Des_EcbEncrypt(&enc,cipher, plain, sizeof(plain)) != 0) {
    	// error encrypting message
    }
    \endcode

    \sa wc_Des_SetKe
*/
WOLFSSL_API int  wc_Des_EcbEncrypt(Des* des, byte* out,
                                   const byte* in, word32 sz);

/*!
    \ingroup 3DES

    \brief This function encrypts the input message, in, and stores the
    result in the output buffer, out. It uses Des3 encryption with
    Electronic Codebook (ECB) mode. Warning: In nearly all use cases ECB
    mode is considered to be less secure. Please avoid using ECB API’s
    directly whenever possible.

    \return 0 Returned upon successfully encrypting the given plaintext

    \param des3 pointer to the Des3 structure to use for encryption
    \param out pointer to the buffer in which to store the encrypted message
    \param in pointer to the input buffer containing the plaintext to encrypt
    \param sz length of the plaintext to encrypt

    _Example_
    /code
    Des3 enc; // Des3 structure used for encryption
    // initialize enc with wc_Des3_SetKey, use mode DES_ENCRYPTION

    byte plain[]  = { // initialize with message to encrypt };
    byte cipher[sizeof(plain)];

    if ( wc_Des3_EcbEncrypt(&enc,cipher, plain, sizeof(plain)) != 0) {
        // error encrypting message
    }
    /endcode

    \sa wc_Des3_SetKey
*/
WOLFSSL_API int wc_Des3_EcbEncrypt(Des3* des, byte* out,
                                   const byte* in, word32 sz);

/*!
    \ingroup 3DES

    \brief This function sets the key and initialization vector (iv) for
    the Des3 structure given as argument. It also initializes and allocates
    space for the buffers needed for encryption and decryption, if these
    have not yet been initialized. Note: If no iv is provided (i.e. iv ==
    NULL) the initialization vector defaults to an iv of 0.

    \return 0 On successfully setting the key and initialization vector
    for the Des structure

    \param des3 pointer to the Des3 structure to initialize
    \param key pointer to the buffer containing the 24 byte key with which
    to initialize the Des3 structure
    \param iv pointer to the buffer containing the 8 byte iv with which to
    initialize the Des3 structure. If this is not provided, the iv defaults
    to 0
    \param dir direction of encryption. Valid options are: DES_ENCRYPTION,
    and DES_DECRYPTION

    _Example_
    \code
    Des3 enc; // Des3 structure used for encryption
    int ret;
    byte key[] = { // initialize with 24 byte key };
    byte iv[]  = { // initialize with 8 byte iv };

    ret = wc_Des3_SetKey(&des, key, iv, DES_ENCRYPTION);
    if (ret != 0) {
    	// error initializing des structure
    }
    \endcode

    \sa wc_Des3_SetIV
    \sa wc_Des3_CbcEncrypt
    \sa wc_Des3_CbcDecrypt
*/
WOLFSSL_API int  wc_Des3_SetKey(Des3* des, const byte* key,
                                const byte* iv,int dir);

/*!
    \ingroup 3DES

    \brief This function sets the initialization vector (iv) for the Des3
    structure given as argument. When passed a NULL iv, it sets the
    initialization vector to 0.

    \return none No returns.

    \param des pointer to the Des3 structure for which to set the iv
    \param iv pointer to the buffer containing the 8 byte iv with which to
    initialize the Des3 structure. If this is not provided, the iv
    defaults to 0

    _Example_
    \code
    Des3 enc; // Des3 structure used for encryption
    // initialize enc with wc_Des3_SetKey

    byte iv[]  = { // initialize with 8 byte iv };

    wc_Des3_SetIV(&enc, iv);
    }
    \endcode

    \sa wc_Des3_SetKey
*/
WOLFSSL_API int  wc_Des3_SetIV(Des3* des, const byte* iv);

/*!
    \ingroup 3DES

    \brief This function encrypts the input message, in, and stores the
    result in the output buffer, out. It uses Triple Des (3DES) encryption
    with cipher block chaining (CBC) mode.

    \return 0 Returned upon successfully encrypting the given input message

    \param des pointer to the Des3 structure to use for encryption
    \param out pointer to the buffer in which to store the encrypted ciphertext
    \param in pointer to the input buffer containing the message to encrypt
    \param sz length of the message to encrypt

    _Example_
    \code
    Des3 enc; // Des3 structure used for encryption
    // initialize enc with wc_Des3_SetKey, use mode DES_ENCRYPTION

    byte plain[]  = { // initialize with message };
    byte cipher[sizeof(plain)];

    if ( wc_Des3_CbcEncrypt(&enc, cipher, plain, sizeof(plain)) != 0) {
	    // error encrypting message
    }
    \endcode

    \sa wc_Des3_SetKey
    \sa wc_Des3_CbcDecrypt
*/
WOLFSSL_API int  wc_Des3_CbcEncrypt(Des3* des, byte* out,
                                    const byte* in,word32 sz);

/*!
    \ingroup 3DES

    \brief This function decrypts the input ciphertext, in, and stores the
    resulting plaintext in the output buffer, out. It uses Triple Des (3DES)
    encryption with cipher block chaining (CBC) mode.

    \return 0 Returned upon successfully decrypting the given ciphertext

    \param des pointer to the Des3 structure to use for decryption
    \param out pointer to the buffer in which to store the decrypted plaintext
    \param in pointer to the input buffer containing the encrypted ciphertext
    \param sz length of the ciphertext to decrypt

    _Example_
    \code
    Des3 dec; // Des structure used for decryption
    // initialize dec with wc_Des3_SetKey, use mode DES_DECRYPTION

    byte cipher[]  = { // initialize with ciphertext };
    byte decoded[sizeof(cipher)];

    if ( wc_Des3_CbcDecrypt(&dec, decoded, cipher, sizeof(cipher)) != 0) {
    	// error decrypting message
    }
    \endcode

    \sa wc_Des3_SetKey
    \sa wc_Des3_CbcEncrypt
*/
WOLFSSL_API int  wc_Des3_CbcDecrypt(Des3* des, byte* out,
                                    const byte* in,word32 sz);