/*
 * FreeRTOS V202212.00
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://aws.amazon.com/freertos
 *
 */

#ifndef DEMO_CONFIG_H
#define DEMO_CONFIG_H

/* FreeRTOS config include. */
#include "FreeRTOSConfig.h"

/**************************************************/
/******* DO NOT CHANGE the following order ********/
/**************************************************/

/* Include logging header files and define logging macros in the following order:
 * 1. Include the header file "logging_levels.h".
 * 2. Define the LIBRARY_LOG_NAME and LIBRARY_LOG_LEVEL macros depending on
 * the logging configuration for DEMO.
 * 3. Include the header file "logging_stack.h", if logging is enabled for DEMO.
 */

#include "logging_levels.h"

/* Logging configuration for the Demo. */
#ifndef LIBRARY_LOG_NAME
    #define LIBRARY_LOG_NAME    "MQTTDemo"
#endif

#ifndef LIBRARY_LOG_LEVEL
    #define LIBRARY_LOG_LEVEL    LOG_INFO
#endif
#include "logging_stack.h"

/************ End of logging configuration ****************/

/**
 * @brief The MQTT client identifier used in this example.  Each client identifier
 * must be unique; so edit as required to ensure that no two clients connecting to
 * the same broker use the same client identifier.
 *
 * #define democonfigCLIENT_IDENTIFIER    "insert here."
 */

/**
 * @brief Endpoint of the MQTT broker to connect to.
 *
 * This demo application can be run with any MQTT broker, that supports mutual
 * authentication.
 *
 * For AWS IoT MQTT broker, this is the Thing's REST API Endpoint.
 *
 * @note Your AWS IoT Core endpoint can be found in the AWS IoT console under
 * Settings/Custom Endpoint, or using the describe-endpoint REST API (with
 * AWS CLI command line tool).
 *
 * @note If you would like to setup an MQTT broker for running this demo,
 * please see \`mqtt_broker_setup.txt\`.
 *
 * #define democonfigMQTT_BROKER_ENDPOINT    "...insert here..."
 */

/**
 * @brief The port to use for the demo.
 *
 * In general, port 8883 is for secured MQTT connections.
 *
 * @note Port 443 requires use of the ALPN TLS extension with the ALPN protocol
 * name. Using ALPN with this demo would require additional changes, including
 * setting the \`pAlpnProtos\` member of the \`NetworkCredentials_t\` struct before
 * forming the TLS connection. When using port 8883, ALPN is not required.
 *
 * #define democonfigMQTT_BROKER_PORT    ( insert here. )
 */
#define democonfigMQTT_BROKER_PORT    ( 8883 )

/**
 * @brief Server's root CA certificate.
 *
 * For AWS IoT MQTT broker, this certificate is used to identify the AWS IoT
 * server and is publicly available. Refer to the AWS documentation available
 * in the link below.
 * https://docs.aws.amazon.com/iot/latest/developerguide/server-authentication.html#server-authentication-certs
 *
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----\n"
 *
 * #define democonfigROOT_CA_PEM    "...insert here..."
 */
#define democonfigROOT_CA_PEM                                             \
    "-----BEGIN CERTIFICATE-----\\n"                                      \\
    "MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF\\n" \\
    "ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6\\n" \\
    "b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL\\n" \\
    "MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv\\n" \\
    "b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj\\n" \\
    "ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM\\n" \\
    "9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw\\n" \\
    "IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6\\n" \\
    "VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L\\n" \\
    "93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm\\n" \\
    "jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC\\n" \\
    "AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA\\n" \\
    "A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI\\n" \\
    "U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs\\n" \\
    "N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv\\n" \\
    "o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU\\n" \\
    "5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy\\n" \\
    "rqXRfboQnoZsG4q5WTP468SQvvG5\\n"                                     \\
    "-----END CERTIFICATE-----\\n"

/**
 * @brief Client certificate.
 *
 * For AWS IoT MQTT broker, refer to the AWS documentation below for details
 * regarding client authentication.
 * https://docs.aws.amazon.com/iot/latest/developerguide/client-authentication.html
 *
 * @note This certificate should be PEM-encoded.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN CERTIFICATE-----\n"\
 * "...base64 data...\n"\
 * "-----END CERTIFICATE-----\n"
 *
 * #define democonfigCLIENT_CERTIFICATE_PEM    "...insert here..."
 */

/**
 * @brief PEM-encoded client private key.
 *
 * Must include the PEM header and footer:
 * "-----BEGIN RSA PRIVATE KEY-----\\n"\\
 * "...base64 data...\\n"\\
 * "-----END RSA PRIVATE KEY-----\\n"
 *
 * #define democonfigCLIENT_PRIVATE_KEY_PEM    "...insert here..."
 */

/**
 * @brief An option to disable Server Name Indication.
 *
 * @note When using a local Mosquitto server setup, SNI needs to be disabled
 * for an MQTT broker that only has an IP address but no hostname. However,
 * SNI should be enabled whenever possible.
 */
#define democonfigDISABLE_SNI    ( pdFALSE )

/**
 * @brief Configuration that indicates if the demo connection is made to the AWS IoT Core MQTT broker.
 *
 * If username/password based authentication is used, the demo will use appropriate TLS ALPN and
 * SNI configurations as required for the Custom Authentication feature of AWS IoT.
 * For more information, refer to the following documentation:
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-auth.html#custom-auth-mqtt
 *
 * #define democonfigUSE_AWS_IOT_CORE_BROKER    ( 1 )
 */

/**
 * @brief The username value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * For AWS IoT MQTT broker, refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_USERNAME    "...insert here..."
 */

/**
 * @brief The password value for authenticating client to the MQTT broker when
 * username/password based client authentication is used.
 *
 * For AWS IoT MQTT broker, refer to the AWS IoT documentation below for
 * details regarding client authentication with a username and password.
 * https://docs.aws.amazon.com/iot/latest/developerguide/custom-authentication.html
 * An authorizer setup needs to be done, as mentioned in the above link, to use
 * username/password based client authentication.
 *
 * #define democonfigCLIENT_PASSWORD    "...insert here..."
 */

/**
 * @brief The name of the operating system that the application is running on.
 * The current value is given as an example. Please update for your specific
 * operating system.
 */
#define democonfigOS_NAME                   "FreeRTOS"

/**
 * @brief The version of the operating system that the application is running
 * on. The current value is given as an example. Please update for your specific
 * operating system version.
 */
#define democonfigOS_VERSION                tskKERNEL_VERSION_NUMBER

/**
 * @brief The name of the hardware platform the application is running on. The
 * current value is given as an example. Please update for your specific
 * hardware platform.
 */
#define democonfigHARDWARE_PLATFORM_NAME    "WinSim"

/**
 * @brief The name of the MQTT library used and its version, following an "@"
 * symbol.
 */
#define democonfigMQTT_LIB                  "core-mqtt@1.0.0"

/**
 * @brief Set the stack size of the main demo task.
 *
 * In the Windows port, this stack only holds a structure. The actual
 * stack is created by an operating system thread.
 */
#define democonfigDEMO_STACKSIZE            configMINIMAL_STACK_SIZE

/**
 * @brief Size of the network buffer for MQTT packets.
 */
#define democonfigNETWORK_BUFFER_SIZE       ( 1024U )

#endif /* DEMO_CONFIG_H */