/* * FreeRTOS Kernel V10.5.1 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * SPDX-License-Identifier: MIT * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * https://www.FreeRTOS.org * https://github.com/FreeRTOS * */ /*----------------------------------------------------------- * Implementation of functions defined in portable.h for the ARM CM4F MPU port. *----------------------------------------------------------*/ /* IAR includes. */ #include /* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining * all the API functions to use the MPU wrappers. That should only be done when * task.h is included from an application file. */ #define MPU_WRAPPERS_INCLUDED_FROM_API_FILE /* Scheduler includes. */ #include "FreeRTOS.h" #include "task.h" #undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE #ifndef __ARMVFP__ #error This port can only be used when the project options are configured to enable hardware floating point support. #endif #if ( configMAX_SYSCALL_INTERRUPT_PRIORITY == 0 ) #error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See http: /*www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ #endif #ifndef configSYSTICK_CLOCK_HZ #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ /* Ensure the SysTick is clocked at the same frequency as the core. */ #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) #else /* The way the SysTick is clocked is not modified in case it is not the same * as the core. */ #define portNVIC_SYSTICK_CLK_BIT ( 0 ) #endif #ifndef configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS #warning "configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS is not defined. We recommend defining it to 0 in FreeRTOSConfig.h for better security." #define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 1 #endif /* Constants required to manipulate the core. Registers first... */ #define portNVIC_SYSTICK_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000e010 ) ) #define portNVIC_SYSTICK_LOAD_REG ( *( ( volatile uint32_t * ) 0xe000e014 ) ) #define portNVIC_SYSTICK_CURRENT_VALUE_REG ( *( ( volatile uint32_t * ) 0xe000e018 ) ) #define portNVIC_SHPR3_REG ( *( ( volatile uint32_t * ) 0xe000ed20 ) ) #define portNVIC_SHPR2_REG ( *( ( volatile uint32_t * ) 0xe000ed1c ) ) #define portNVIC_SYS_CTRL_STATE_REG ( *( ( volatile uint32_t * ) 0xe000ed24 ) ) #define portNVIC_MEM_FAULT_ENABLE ( 1UL << 16UL ) /* Constants required to access and manipulate the MPU. */ #define portMPU_TYPE_REG ( *( ( volatile uint32_t * ) 0xe000ed90 ) ) #define portMPU_REGION_BASE_ADDRESS_REG ( *( ( volatile uint32_t * ) 0xe000ed9C ) ) #define portMPU_REGION_ATTRIBUTE_REG ( *( ( volatile uint32_t * ) 0xe000edA0 ) ) #define portMPU_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed94 ) ) #define portEXPECTED_MPU_TYPE_VALUE ( configTOTAL_MPU_REGIONS << 8UL ) #define portMPU_ENABLE ( 0x01UL ) #define portMPU_BACKGROUND_ENABLE ( 1UL << 2UL ) #define portPRIVILEGED_EXECUTION_START_ADDRESS ( 0UL ) #define portMPU_REGION_VALID ( 0x10UL ) #define portMPU_REGION_ENABLE ( 0x01UL ) #define portPERIPHERALS_START_ADDRESS 0x40000000UL #define portPERIPHERALS_END_ADDRESS 0x5FFFFFFFUL /* ...then bits in the registers. */ #define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) #define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) #define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) #define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) #define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) /* Constants used to detect Cortex-M7 r0p0 and r0p1 cores, and ensure * that a work around is active for errata 837070. */ #define portCPUID ( *( ( volatile uint32_t * ) 0xE000ed00 ) ) #define portCORTEX_M7_r0p1_ID ( 0x410FC271UL ) #define portCORTEX_M7_r0p0_ID ( 0x410FC270UL ) #define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) #define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) #define portNVIC_SVC_PRI ( ( ( uint32_t ) configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL ) << 24UL ) /* Constants required to check the validity of an interrupt priority. */ #define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) #define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) #define portAIRCR_REG ( *( ( volatile uint32_t * ) 0xE000ED0C ) ) #define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) #define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) #define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) #define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) #define portPRIGROUP_SHIFT ( 8UL ) /* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ #define portVECTACTIVE_MASK ( 0xFFUL ) /* Constants required to manipulate the VFP. */ #define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */ #define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) /* Constants required to set up the initial stack. */ #define portINITIAL_XPSR ( 0x01000000 ) #define portINITIAL_EXC_RETURN ( 0xfffffffd ) #define portINITIAL_CONTROL_IF_UNPRIVILEGED ( 0x03 ) #define portINITIAL_CONTROL_IF_PRIVILEGED ( 0x02 ) /* Offsets in the stack to the parameters when inside the SVC handler. */ #define portOFFSET_TO_PC ( 6 ) /* The systick is a 24-bit counter. */ #define portMAX_24_BIT_NUMBER ( 0xffffffUL ) /* A fiddle factor to estimate the number of SysTick counts that would have * occurred while the SysTick counter is stopped during tickless idle * calculations. */ #define portMISSED_COUNTS_FACTOR ( 45UL ) /* For strict compliance with the Cortex-M spec the task start address should * have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ #define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) /* * Configure a number of standard MPU regions that are used by all tasks. */ static void prvSetupMPU( void ) PRIVILEGED_FUNCTION; /* * Return the smallest MPU region size that a given number of bytes will fit * into. The region size is returned as the value that should be programmed * into the region attribute register for that region. */ static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) PRIVILEGED_FUNCTION; /* * Setup the timer to generate the tick interrupts. The implementation in this * file is weak to allow application writers to change the timer used to * generate the tick interrupt. */ void vPortSetupTimerInterrupt( void ); /* * Exception handlers. */ void xPortSysTickHandler( void ) PRIVILEGED_FUNCTION; /* * Start first task is a separate function so it can be tested in isolation. */ extern void vPortStartFirstTask( void ) PRIVILEGED_FUNCTION; /* * Turn the VFP on. */ extern void vPortEnableVFP( void ); /* * The C portion of the SVC handler. */ void vPortSVCHandler_C( uint32_t * pulParam ); /* * Called from the SVC handler used to start the scheduler. */ extern void vPortRestoreContextOfFirstTask( void ) PRIVILEGED_FUNCTION; /** * @brief Enter critical section. */ #if( configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS == 1 ) void vPortEnterCritical( void ) FREERTOS_SYSTEM_CALL; #else void vPortEnterCritical( void ) PRIVILEGED_FUNCTION; #endif /** * @brief Exit from critical section. */ #if( configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS == 1 ) void vPortExitCritical( void ) FREERTOS_SYSTEM_CALL; #else void vPortExitCritical( void ) PRIVILEGED_FUNCTION; #endif /*-----------------------------------------------------------*/ /* Each task maintains its own interrupt status in the critical nesting * variable. */ static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; /* * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure * FreeRTOS API functions are not called from interrupts that have been assigned * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. */ #if ( configASSERT_DEFINED == 1 ) static uint8_t ucMaxSysCallPriority = 0; static uint32_t ulMaxPRIGROUPValue = 0; static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; #endif /* configASSERT_DEFINED */ /*-----------------------------------------------------------*/ /* * See header file for description. */ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void * pvParameters, BaseType_t xRunPrivileged ) { /* Simulate the stack frame as it would be created by a context switch * interrupt. */ /* Offset added to account for the way the MCU uses the stack on entry/exit * of interrupts, and to ensure alignment. */ pxTopOfStack--; *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ pxTopOfStack--; *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ pxTopOfStack--; *pxTopOfStack = ( StackType_t ) 0; /* LR */ /* Save code space by skipping register initialisation. */ pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ /* A save method is being used that requires each task to maintain its * own exec return value. */ pxTopOfStack--; *pxTopOfStack = portINITIAL_EXC_RETURN; pxTopOfStack -= 9; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ if( xRunPrivileged == pdTRUE ) { *pxTopOfStack = portINITIAL_CONTROL_IF_PRIVILEGED; } else { *pxTopOfStack = portINITIAL_CONTROL_IF_UNPRIVILEGED; } return pxTopOfStack; } /*-----------------------------------------------------------*/ void vPortSVCHandler_C( uint32_t * pulParam ) { uint8_t ucSVCNumber; uint32_t ulPC; #if ( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) extern uint32_t __syscalls_flash_start__[]; extern uint32_t __syscalls_flash_end__[]; #endif /* #if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) */ /* The stack contains: r0, r1, r2, r3, r12, LR, PC and xPSR. The first * argument (r0) is pulParam[ 0 ]. */ ulPC = pulParam[ portOFFSET_TO_PC ]; ucSVCNumber = ( ( uint8_t * ) ulPC )[ -2 ]; switch( ucSVCNumber ) { case portSVC_START_SCHEDULER: portNVIC_SHPR2_REG |= portNVIC_SVC_PRI; vPortRestoreContextOfFirstTask(); break; case portSVC_YIELD: portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; /* Barriers are normally not required * but do ensure the code is completely * within the specified behaviour for the * architecture. */ __asm volatile ( "dsb" ::: "memory" ); __asm volatile ( "isb" ); break; #if ( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) case portSVC_RAISE_PRIVILEGE: /* Only raise the privilege, if the * svc was raised from any of the * system calls. */ if( ( ulPC >= ( uint32_t ) __syscalls_flash_start__ ) && ( ulPC <= ( uint32_t ) __syscalls_flash_end__ ) ) { __asm volatile ( " mrs r1, control \n"/* Obtain current control value. */ " bic r1, r1, #1 \n"/* Set privilege bit. */ " msr control, r1 \n"/* Write back new control value. */ ::: "r1", "memory" ); } break; #else /* if ( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) */ case portSVC_RAISE_PRIVILEGE: __asm volatile ( " mrs r1, control \n"/* Obtain current control value. */ " bic r1, r1, #1 \n"/* Set privilege bit. */ " msr control, r1 \n"/* Write back new control value. */ ::: "r1", "memory" ); break; #endif /* #if( configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY == 1 ) */ default: /* Unknown SVC call. */ break; } } /*-----------------------------------------------------------*/ /* * See header file for description. */ BaseType_t xPortStartScheduler( void ) { /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. * See https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY ); /* Errata 837070 workaround must only be enabled on Cortex-M7 r0p0 * and r0p1 cores. */ #if ( configENABLE_ERRATA_837070_WORKAROUND == 1 ) configASSERT( ( portCPUID == portCORTEX_M7_r0p1_ID ) || ( portCPUID == portCORTEX_M7_r0p0_ID ) ); #else /* When using this port on a Cortex-M7 r0p0 or r0p1 core, define * configENABLE_ERRATA_837070_WORKAROUND to 1 in your * FreeRTOSConfig.h. */ configASSERT( portCPUID != portCORTEX_M7_r0p1_ID ); configASSERT( portCPUID != portCORTEX_M7_r0p0_ID ); #endif #if ( configASSERT_DEFINED == 1 ) { volatile uint32_t ulOriginalPriority; volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); volatile uint8_t ucMaxPriorityValue; /* Determine the maximum priority from which ISR safe FreeRTOS API * functions can be called. ISR safe functions are those that end in * "FromISR". FreeRTOS maintains separate thread and ISR API functions to * ensure interrupt entry is as fast and simple as possible. * * Save the interrupt priority value that is about to be clobbered. */ ulOriginalPriority = *pucFirstUserPriorityRegister; /* Determine the number of priority bits available. First write to all * possible bits. */ *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; /* Read the value back to see how many bits stuck. */ ucMaxPriorityValue = *pucFirstUserPriorityRegister; /* Use the same mask on the maximum system call priority. */ ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; /* Calculate the maximum acceptable priority group value for the number * of bits read back. */ ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) { ulMaxPRIGROUPValue--; ucMaxPriorityValue <<= ( uint8_t ) 0x01; } #ifdef __NVIC_PRIO_BITS { /* Check the CMSIS configuration that defines the number of * priority bits matches the number of priority bits actually queried * from the hardware. */ configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); } #endif #ifdef configPRIO_BITS { /* Check the FreeRTOS configuration that defines the number of * priority bits matches the number of priority bits actually queried * from the hardware. */ configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); } #endif /* Shift the priority group value back to its position within the AIRCR * register. */ ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; /* Restore the clobbered interrupt priority register to its original * value. */ *pucFirstUserPriorityRegister = ulOriginalPriority; } #endif /* configASSERT_DEFINED */ /* Make PendSV and SysTick the lowest priority interrupts. */ portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI; portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI; /* Configure the regions in the MPU that are common to all tasks. */ prvSetupMPU(); /* Start the timer that generates the tick ISR. Interrupts are disabled * here already. */ vPortSetupTimerInterrupt(); /* Initialise the critical nesting count ready for the first task. */ uxCriticalNesting = 0; /* Ensure the VFP is enabled - it should be anyway. */ vPortEnableVFP(); /* Lazy save always. */ *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; /* Start the first task. */ vPortStartFirstTask(); /* Should not get here! */ return 0; } /*-----------------------------------------------------------*/ void vPortEndScheduler( void ) { /* Not implemented in ports where there is nothing to return to. * Artificially force an assert. */ configASSERT( uxCriticalNesting == 1000UL ); } /*-----------------------------------------------------------*/ void vPortEnterCritical( void ) { #if( configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS == 1 ) if( portIS_PRIVILEGED() == pdFALSE ) { portRAISE_PRIVILEGE(); portMEMORY_BARRIER(); portDISABLE_INTERRUPTS(); uxCriticalNesting++; /* This is not the interrupt safe version of the enter critical function so * assert() if it is being called from an interrupt context. Only API * functions that end in "FromISR" can be used in an interrupt. Only assert if * the critical nesting count is 1 to protect against recursive calls if the * assert function also uses a critical section. */ if( uxCriticalNesting == 1 ) { configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); } portMEMORY_BARRIER(); portRESET_PRIVILEGE(); portMEMORY_BARRIER(); } else { portDISABLE_INTERRUPTS(); uxCriticalNesting++; /* This is not the interrupt safe version of the enter critical function so * assert() if it is being called from an interrupt context. Only API * functions that end in "FromISR" can be used in an interrupt. Only assert if * the critical nesting count is 1 to protect against recursive calls if the * assert function also uses a critical section. */ if( uxCriticalNesting == 1 ) { configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); } } #else portDISABLE_INTERRUPTS(); uxCriticalNesting++; /* This is not the interrupt safe version of the enter critical function so * assert() if it is being called from an interrupt context. Only API * functions that end in "FromISR" can be used in an interrupt. Only assert if * the critical nesting count is 1 to protect against recursive calls if the * assert function also uses a critical section. */ if( uxCriticalNesting == 1 ) { configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); } #endif } /*-----------------------------------------------------------*/ void vPortExitCritical( void ) { #if( configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS == 1 ) if( portIS_PRIVILEGED() == pdFALSE ) { portRAISE_PRIVILEGE(); portMEMORY_BARRIER(); configASSERT( uxCriticalNesting ); uxCriticalNesting--; if( uxCriticalNesting == 0 ) { portENABLE_INTERRUPTS(); } portMEMORY_BARRIER(); portRESET_PRIVILEGE(); portMEMORY_BARRIER(); } else { configASSERT( uxCriticalNesting ); uxCriticalNesting--; if( uxCriticalNesting == 0 ) { portENABLE_INTERRUPTS(); } } #else configASSERT( uxCriticalNesting ); uxCriticalNesting--; if( uxCriticalNesting == 0 ) { portENABLE_INTERRUPTS(); } #endif } /*-----------------------------------------------------------*/ void xPortSysTickHandler( void ) { /* The SysTick runs at the lowest interrupt priority, so when this interrupt * executes all interrupts must be unmasked. There is therefore no need to * save and then restore the interrupt mask value as its value is already * known. */ portDISABLE_INTERRUPTS(); { /* Increment the RTOS tick. */ if( xTaskIncrementTick() != pdFALSE ) { /* A context switch is required. Context switching is performed in * the PendSV interrupt. Pend the PendSV interrupt. */ portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; } } portENABLE_INTERRUPTS(); } /*-----------------------------------------------------------*/ /* * Setup the systick timer to generate the tick interrupts at the required * frequency. */ __weak void vPortSetupTimerInterrupt( void ) { /* Stop and clear the SysTick. */ portNVIC_SYSTICK_CTRL_REG = 0UL; portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; /* Configure SysTick to interrupt at the requested rate. */ portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); } /*-----------------------------------------------------------*/ static void prvSetupMPU( void ) { extern uint32_t __privileged_functions_start__[]; extern uint32_t __privileged_functions_end__[]; extern uint32_t __FLASH_segment_start__[]; extern uint32_t __FLASH_segment_end__[]; extern uint32_t __privileged_data_start__[]; extern uint32_t __privileged_data_end__[]; /* The only permitted number of regions are 8 or 16. */ configASSERT( ( configTOTAL_MPU_REGIONS == 8 ) || ( configTOTAL_MPU_REGIONS == 16 ) ); /* Ensure that the configTOTAL_MPU_REGIONS is configured correctly. */ configASSERT( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE ); /* Check the expected MPU is present. */ if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE ) { /* First setup the unprivileged flash for unprivileged read only access. */ portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portUNPRIVILEGED_FLASH_REGION ); portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_ONLY ) | ( ( configTEX_S_C_B_FLASH & portMPU_RASR_TEX_S_C_B_MASK ) << portMPU_RASR_TEX_S_C_B_LOCATION ) | ( prvGetMPURegionSizeSetting( ( uint32_t ) __FLASH_segment_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | ( portMPU_REGION_ENABLE ); /* Setup the privileged flash for privileged only access. This is where * the kernel code is placed. */ portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_functions_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portPRIVILEGED_FLASH_REGION ); portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_ONLY ) | ( ( configTEX_S_C_B_FLASH & portMPU_RASR_TEX_S_C_B_MASK ) << portMPU_RASR_TEX_S_C_B_LOCATION ) | ( prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_functions_end__ - ( uint32_t ) __privileged_functions_start__ ) ) | ( portMPU_REGION_ENABLE ); /* Setup the privileged data RAM region. This is where the kernel data * is placed. */ portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portPRIVILEGED_RAM_REGION ); portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | ( portMPU_REGION_EXECUTE_NEVER ) | ( ( configTEX_S_C_B_SRAM & portMPU_RASR_TEX_S_C_B_MASK ) << portMPU_RASR_TEX_S_C_B_LOCATION ) | prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | ( portMPU_REGION_ENABLE ); /* By default allow everything to access the general peripherals. The * system peripherals and registers are protected. */ portMPU_REGION_BASE_ADDRESS_REG = ( portPERIPHERALS_START_ADDRESS ) | ( portMPU_REGION_VALID ) | ( portGENERAL_PERIPHERALS_REGION ); portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_WRITE | portMPU_REGION_EXECUTE_NEVER ) | ( prvGetMPURegionSizeSetting( portPERIPHERALS_END_ADDRESS - portPERIPHERALS_START_ADDRESS ) ) | ( portMPU_REGION_ENABLE ); /* Enable the memory fault exception. */ portNVIC_SYS_CTRL_STATE_REG |= portNVIC_MEM_FAULT_ENABLE; /* Enable the MPU with the background region configured. */ portMPU_CTRL_REG |= ( portMPU_ENABLE | portMPU_BACKGROUND_ENABLE ); } } /*-----------------------------------------------------------*/ static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) { uint32_t ulRegionSize, ulReturnValue = 4; /* 32 is the smallest region size, 31 is the largest valid value for * ulReturnValue. */ for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) ) { if( ulActualSizeInBytes <= ulRegionSize ) { break; } else { ulReturnValue++; } } /* Shift the code by one before returning so it can be written directly * into the the correct bit position of the attribute register. */ return( ulReturnValue << 1UL ); } /*-----------------------------------------------------------*/ void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t * pxBottomOfStack, uint32_t ulStackDepth ) { extern uint32_t __SRAM_segment_start__[]; extern uint32_t __SRAM_segment_end__[]; extern uint32_t __privileged_data_start__[]; extern uint32_t __privileged_data_end__[]; int32_t lIndex; uint32_t ul; if( xRegions == NULL ) { /* No MPU regions are specified so allow access to all RAM. */ xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = ( ( uint32_t ) __SRAM_segment_start__ ) | /* Base address. */ ( portMPU_REGION_VALID ) | ( portSTACK_REGION ); /* Region number. */ xMPUSettings->xRegion[ 0 ].ulRegionAttribute = ( portMPU_REGION_READ_WRITE ) | ( portMPU_REGION_EXECUTE_NEVER ) | ( ( configTEX_S_C_B_SRAM & portMPU_RASR_TEX_S_C_B_MASK ) << portMPU_RASR_TEX_S_C_B_LOCATION ) | ( prvGetMPURegionSizeSetting( ( uint32_t ) __SRAM_segment_end__ - ( uint32_t ) __SRAM_segment_start__ ) ) | ( portMPU_REGION_ENABLE ); /* Invalidate user configurable regions. */ for( ul = 1UL; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) { xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( ( ul - 1UL ) | portMPU_REGION_VALID ); xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; } } else { /* This function is called automatically when the task is created - in * which case the stack region parameters will be valid. At all other * times the stack parameters will not be valid and it is assumed that the * stack region has already been configured. */ if( ulStackDepth > 0 ) { /* Define the region that allows access to the stack. */ xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = ( ( uint32_t ) pxBottomOfStack ) | ( portMPU_REGION_VALID ) | ( portSTACK_REGION ); /* Region number. */ xMPUSettings->xRegion[ 0 ].ulRegionAttribute = ( portMPU_REGION_READ_WRITE ) | ( portMPU_REGION_EXECUTE_NEVER ) | ( prvGetMPURegionSizeSetting( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) ) | ( ( configTEX_S_C_B_SRAM & portMPU_RASR_TEX_S_C_B_MASK ) << portMPU_RASR_TEX_S_C_B_LOCATION ) | ( portMPU_REGION_ENABLE ); } lIndex = 0; for( ul = 1UL; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) { if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL ) { /* Translate the generic region definition contained in * xRegions into the CM4 specific MPU settings that are then * stored in xMPUSettings. */ xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) | ( portMPU_REGION_VALID ) | ( ul - 1UL ); /* Region number. */ xMPUSettings->xRegion[ ul ].ulRegionAttribute = ( prvGetMPURegionSizeSetting( xRegions[ lIndex ].ulLengthInBytes ) ) | ( xRegions[ lIndex ].ulParameters ) | ( portMPU_REGION_ENABLE ); } else { /* Invalidate the region. */ xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( ( ul - 1UL ) | portMPU_REGION_VALID ); xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; } lIndex++; } } } /*-----------------------------------------------------------*/ #if ( configASSERT_DEFINED == 1 ) void vPortValidateInterruptPriority( void ) { uint32_t ulCurrentInterrupt; uint8_t ucCurrentPriority; /* Obtain the number of the currently executing interrupt. */ __asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" ); /* Is the interrupt number a user defined interrupt? */ if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) { /* Look up the interrupt's priority. */ ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; /* The following assertion will fail if a service routine (ISR) for * an interrupt that has been assigned a priority above * configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API * function. ISR safe FreeRTOS API functions must *only* be called * from interrupts that have been assigned a priority at or below * configMAX_SYSCALL_INTERRUPT_PRIORITY. * * Numerically low interrupt priority numbers represent logically high * interrupt priorities, therefore the priority of the interrupt must * be set to a value equal to or numerically *higher* than * configMAX_SYSCALL_INTERRUPT_PRIORITY. * * Interrupts that use the FreeRTOS API must not be left at their * default priority of zero as that is the highest possible priority, * which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, * and therefore also guaranteed to be invalid. * * FreeRTOS maintains separate thread and ISR API functions to ensure * interrupt entry is as fast and simple as possible. * * The following links provide detailed information: * https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html * https://www.FreeRTOS.org/FAQHelp.html */ configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); } /* Priority grouping: The interrupt controller (NVIC) allows the bits * that define each interrupt's priority to be split between bits that * define the interrupt's pre-emption priority bits and bits that define * the interrupt's sub-priority. For simplicity all bits must be defined * to be pre-emption priority bits. The following assertion will fail if * this is not the case (if some bits represent a sub-priority). * * If the application only uses CMSIS libraries for interrupt * configuration then the correct setting can be achieved on all Cortex-M * devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the * scheduler. Note however that some vendor specific peripheral libraries * assume a non-zero priority group setting, in which cases using a value * of zero will result in unpredictable behaviour. */ configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); } #endif /* configASSERT_DEFINED */ /*-----------------------------------------------------------*/